Book A Service Call

 

Everyone seems to have their private theory involving How to Install or Replace a Shower Drain.

Upgrading a shower room is just one of the a lot more popular residence improvement projects. Managing the plumbing for draining your shower can be exceptionally easy unless you overdo it.

 

 

Managing Your Own Shower Drain Setup Job

Whether you are a bath tub or shower person, the majority of people seek shower just options when getting a residence. This simple fact implies more than a couple of home owners spend a weekend upgrading or setting up showers in their shower rooms. The good news is for you, it is a fairly straightforward process.

A collector or pan refers to the horizontal surface area situated at the end of the shower. The enthusiast commonly contains a non-slip surface a little banked in the direction of the facility or wherever the drainpipe lies. Incorporated with 3 to 4 inch wall surfaces around the side, the objective of your shower water drainage plumbing is to obtain the water to flow to and down the drain.

You can physically build a collector for your new shower, yet you actually require to think of it. Do you actually wish to enter the problems of getting the sloping appropriate, in addition to ensuring every aspect of it is waterproof? And also I suggest every facet! It is a lot easier to merely get a pre-cast collection agency online or at your regional Lowes, Home Depot or hardware shop. Structure one may sound like a fantastic idea, yet you will possibly really feel in a different way after a number of hrs.

Despite exactly how you go about obtaining a frying pan, you ought to make every effort to make use of one that has the drainpipe located in the same place as the initial pan. Relocating the drainpipe pipes can be a job, especially if the contractor used an one-of-a-kind framework structure. If you are established to move the drainpipe, you are mosting likely to need to cut down the pipeline or extend it, which may suggest destroying big chunks of the flooring. Put another way, you are mosting likely to be checking out a numerous weekend break project.

Presuming we have our drain aligned, the actual attach is fairly straightforward. The drain pipeline ought to be encountering vertical approximately the collection agency. It will certainly typically resemble a "U", which implies it works as a cleanout to keep unpleasant smells from coming back up from the drainpipe. To link the drainpipe, you are going to develop a water tight link between a drain cap on the top of the frying pan and the water drainage pipe. Solutions differ, but you are normally going to do this by putting a coupling piece on the top of the drain pipeline. This is then covered with gaskets as well as essentially screwed into the drainpipe cap. The drainpipe cap ought to function as a locknut, to wit, it screws straight onto the coupling.

The difficult part of this procedure is getting your drainpipe cap to match a watertight setting in the pan. This is achieved by backing off the drainpipe cap when you make certain whatever fits together. At that point, you put plumbers putty around the bottom of the cap and then screw it back on. The putty ought to develop a limited seal in between the cap and the shower pan, which keeps water from dripping under it and also right into the framing under the shower.

Undoubtedly, restroom showers been available in a wide variety of designs these days. If you acquire a collection agency, they usually included plumbing instructions or the shop can note anything uncommon you must know. It seems intricate, however is usually rather straight forward. Have fun!

 

How To Install & Replace A Shower Drain In 5 Steps

 

Replacing a shower drain, or installing one for the first time, often requires a plumber, but if you’re confident in your DIY skills then you may be able to do it yourself. Your new shower drain should come with specific installation instructions, so take time to familiarise yourself with those before you get started. There are several types of shower drain, and the one you choose or are supplied with will depend on your shower tray, your pipes and the manufacturer’s recommendations. All Mira shower trays are compatible with compression-style shower drains, which attach to your home’s drainpipes with compression washers and nuts. Here’s an overview of how to install this type of drain.

 

How to install a compression-style drain

 

Please bear in mind that these are general instructions, and you should refer to the manufacturer’s recommendations to install your shower drain.

 

Trim the drainpipe

 

The drainpipe should come up to 2cm below the lip of the shower drain. You might need to lift the shower base on to mark the right height, and then remove it again before trimming the drainpipe with a hacksaw. Ensure the cut is flat and level.

 

Attach the drain assembly to the shower base

 

Apply silicone caulk to the lower rim of the drain assembly and insert it into the shower base from the top side of the base. This should be done before the base is put in place on the floor. Press the drain assembly firmly into place so that the caulk forms an even seal.

Slide the rubber washer and slip washer on to the drain assembly from underneath the shower base, then thread the drain nut on and tighten it with pliers.

Wipe away any excess caulk that has oozed out.

 

Put the shower base in position

 

Carefully position the shower base so that the drain assembly lines up with the drainpipe and fits inside it. It’s a good idea to get someone else to help out, and it’s usually easier to set the back of the base down first, and then lower the front of the base down.

 

Insert the compression gasket and nut

 

Slide the rubber compression gasket down into the drain opening so that it fits around the drainpipe. The top of the gasket should line up with the top of the pipe, or be slightly lower.

Drop the compression nut into the drain opening and use the fitting tool that will likely have been provided and a screwdriver to tighten the nut. As you tighten it, the gasket will be compressed against the drainpipe, creating a watertight seal.

 

Fit the metal strainer

 

Press the metal strainer into the drain opening, making sure the top surface is lower than the shower floor around it.

And there you have it, a brand-new shower drain! Allow the silicone to set for a full 24 hours before using the shower.

 

Cleaning and maintenance of your shower drain

 

Shower drains can quickly become clogged with hair and a build-up of product, which can lead to bad smells and can prevent your shower water from draining efficiently.

To maintain your shower drain, clear out any strands of hair that gather on the metal strainer after each shower. We recommend cleaning your shower drain thoroughly once a month using boiling water to loosen up soap scum and get things moving.

https://www.mirashowers.co.uk/blog/how-to/how-to-install-replace-a-shower-drain-in-5-steps/

 

I hope you enjoyed our topic on Easy Shower Drain Installation Tips. Thanks a lot for spending some time to read through our blog post. Do you know someone else who is in to the niche? Take a moment to share it. Many thanks for going through it.